(CHANGE)
Select Your Country or Region!
Our products are sold directly or indirectly to United States and Europe, the Middle East and Southeast Asia, South America more than 60 countries and regions.
- 基本信息
-
属性
折光率 1.4142 沸点 100-101°C 熔点 -48°C 密度 0.9360 描述
别名 甲基败脂酸甲酯,2-甲基-2-丙烯酸甲酯,异丁烯酸甲酯;MMA Methacrylic Acid Methyl Ester 产品介绍 易挥发，易燃。溶于乙醇、乙醚、丙酮等多种有机溶剂，微溶于乙二醇和水。在光、热、电离辐射和催化剂存在下易聚合(一般加入0.005~0.01%对苯二酚或连苯三酚)，以防运输及贮存时以生聚合。蒸气压(25.5℃)5.33kPa。 用途 有机合成。 包装 M109623-10L in poly drum - 安全信息
-
额外信息
标识符号 
GHS02,
GHS06,
GHS08
信号词 Danger 危害声明 H225,H301,H311,H331,H370 警示性声明 P210,P260,P280,P301+P310,P311 个人防护设备 Eyeshields,Faceshields,full-face respirator (US),Gloves,multi-purpose combination respirator cartridge (US) 危害码(欧洲) F,Xi 风险声明 (欧洲) R11;R43;R37/38 安全声明(欧洲) S24;S37;S46 WGK德国 1 闪点(摄氏) 8℃ Merck Index 5941 UN代码 1247 是否危化品 一般危险品 - 参考文献
-
额外信息
We're sorry this abstract is currently not available....Read MoreJoint loading is a recently developed loading modality that induces anabolic responses by lateral loads applied to a synovial joint such as an elbow and a knee. The present study extended this loading...Read MorePlasma-enhanced chemical vapor deposited polymers (plasma polymers) are promising candidates for biomaterials applications. In the present study, plasma deposition as a fast and easily scalable method...Read MoreThe purpose of this study was to evaluate and compare the flexural strength of commercially available acrylic (trevalone) and modified polymethylmethacrylate (PMMA).Four groups were tested; Group 1- c...Read MoreThis study investigated the influence of both room temperature storage and water storage on tooth displacement in complete dentures. Thirty maxillary dentures were manufactured and processed using 3 d...Read MoreThis study assesses the capacity of a new hydrophobically modified polysaccharide -hydroxypropyl cellulose-methyl methacrylate - to control drug release in semisolid formulations. The dispersed system...Read MoreTheophylline radial release from cellulose derivatives with different substitution type (HPMC K4M, HPC H, MC A4M) matrix tablets has been modulated by the introduction of a new inert polymeric excipie...Read MoreElectron paramagnetic resonance (EPR) spectroscopy was applied to study the paramagnetic species formed from styrene, 1,1-diphenylethylene, α-methylstyrene, β-methylstyrene and methylmethacrylate ad...Read MoreBiofouling resulting from the attachment of microorganisms communities to the membrane surface is the major obstacle for the widespread application of membrane technology. This work develops a feasibl...Read MoreA novel copolymer of 2-hydroxy-3-menthyloxy-1-(4-methoxyphenyl)-3-oxopropyl methacrylate (HMOPMA) and methyl methacrylate (MMA), [poly(HMOPMA-co-MMA)], was synthesized by free radical polymerization. ...Read MoreThis article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid-liquid microextraction using extraction solvents lighter than water followed by gas chroma...Read MoreAim: Total knee arthroplasties have reached a high grade of quality and safety, but most often fail because of aseptic implant loosening caused by polyethylene wear debris. Wear is generated at the ar...Read MoreThe aim of this study was to evaluate the genotoxic potential of methyl methacrylate (MMA) vapor by simulating standard occupational exposure of 8 hours per day and using the micronucleus test. We use...Read MoreSurgeons are faced with increasingly complex and larger chest wall defects as a result of a variety of pathologies, the majority of which are oncologic. Skeletal reconstruction of these resulting defe...Read MoreAmino-functional macroporous monoliths from polymerized high internal phase emulsion (polyHIPE) were surface modified with initiators for atom transfer radical polymerization (ATRP). The ATRP initiato...Read MoreScrew implantation inevitably causes microdamage in surrounding bone. However, little is known about the detailed characteristics of microdamage in peri-screw bone. In this study, we developed a metho...Read MoreAntibiotic bone cement is commonly used in staged revision arthroplasty as well as the treatment of open fractures. Multiple factors affect antibiotic elution from bone cement. This study was performe...Read MoreIn this study, we examined the potential of cationic nanoparticle - polyethyleneimine-introduced chitosan shell/poly (methyl methacrylate) core nanoparticles (CS-PEI) for siRNA delivery. Initially, DN...Read MoreTo clarify variations of vascular distribution around the mandibular anterior tooth lingual region, an area in which vascular injuries have often been reported during dental implant surgery. The reaso...Read MoreCopolymerization of methyl methacrylate (MMA) and acrylate terminated poly(ethylene oxide-co-ethylene carbonate) (PEOC) macromonomer yields graft copolymer with PEOC side chains. By use of quartz crys...Read MoreWe're sorry this abstract is currently not available....Read MoreDrug therapy in dentistry is essential for patients' treatment and requires special care by dentists, so it must be part of a well-grounded education for predoctoral dental students. The aim of t...Read MoreAim of this study was to assess the cytotoxicity of monomer. An in vitro study was designed to study the growth inhibitory effect of monomer (Stellon, Denture Material Improved, Type I, Class I, Denta...Read MoreWe're sorry this abstract is currently not available....Read MoreFiltek LS is a new composite resin restorative system with a unique, low-shrinking, silorane-based monomer matrix. The current study was conducted to compare the durability of the bond to dentin of th...Read MoreTeratogenic effects of polymethylmethacrylate cement at levels used during routine orthopaedic procedures have never been reported, however the hypothetical risk remains a major concern among female s...Read More - 相关文档
- 评论
-
相关产品
-
2,2-偶氮二异丁腈 , 98%
-
2,2-偶氮二异丁腈 , 99%，重结晶
-
2-丙烯酰氨基-2-甲基-1-丙烷磺酸(AMPS) , 98%
-
3-氨丙基三乙氧基硅烷 , 99%
-
3-氨丙基三乙氧基硅烷 , 98%
-
烯丙基三甲基硅烷 , 98%
-
γ-氨丙基甲基二乙氧基硅烷 , 97%
-
甲基丙烯酸苄基酯 , 98%,含50-100ppmMEHQ稳定剂
-
对叔丁基邻苯二酚(TBC) , AR,98%
-
叔丁基二甲基氯硅烷 , 97%
-
叔丁基二甲基氯硅烷 , 50%甲苯溶液
-
过氧化苯甲酰 , AR
-
过氧化苯甲酰 , 75%, remainder water
-
溴代正癸烷 , >98.0%(GC)
-
溴代十二烷 , 98%
-
BRIJ®O20聚氧乙烯20油醚 , average Mn ~1,150
-
溴代十六烷 , 97%
-
N-叔丁基丙烯酰胺 , 97%
-
三甲基溴硅烷 , 含稳定剂铜, 98%
-
甲基丙烯酸丁酯 , 99%,含10 ppm MEHQ稳定剂
-
甲基丙烯酸丁酯(单体) , 97%,含10 ppm MEHQ稳定剂
-
甲基丙烯酸丁酯 , Standard for GC,>99.5%(GC),含10 ppm MEHQ稳定剂
-
双(三甲基硅烷基)乙炔 , 98%
-
BRIJ? O10聚氧乙烯(10)油醚 , 非离子表面活性剂
-
Brij® 93聚氧乙烯月桂醚 , average Mn ~357
-
叔丁基二甲基氯硅烷 , 用于GC衍生化
-
叔丁基二甲基硅基氯 溶液 , 1.0 M in methylene chloride
-
三甲基溴硅烷 , ≥90%，含稳定剂铜屑
-
氯代十八烷 , 98%
-
1-氯癸烷 , 98%
